Gas control equipment specialists

Cylinder Connectors, Regulators & Gas Control Equipment

Equipment for the safe handling and distribution of pressurised gas cylinders, from BS341 connectors to high-purity stainless regulators, manifolds and hoses, with technical advice from a team that knows gas.

BCGA member

British Compressed Gases Association

Grades 4.5 to 6.0

Industrial, special and high-purity gas

Bespoke & sourced

Manifolds built and parts found to your spec

BS341 · DIN · CGA · NEVOC · AFNOR

Single & two stage, grades 4.5–6.0

Wall-mounted & bespoke builds

Stainless braided hoses & pigtails

Lab & process line regulators

Arrestors, valves, washers & tape

Cylinder Connectors

BS341, DIN 477, CGA, NEVOC and AFNOR connectors in brass and 316 stainless steel, supplied with the correct sealing washer where required.

The British Standard for UK cylinders. Bull nose No.3 and No.4, and flat face No.6 to No.15, in brass and 316 stainless steel.

German standard connectors in 316 stainless steel, No.1 to No.14.

CGA

American standard stainless steel connectors, from CGA 320 to CGA 670.

Also available: NEVOC ISO 5145 and AFNOR connectors.

Connector bestsellers

Not sure which connector fits your gas?

Our BS341 guide lists the connector number for over 50 gases.

Cylinder Mounted Pressure Regulators

Single and two stage regulators for 300 bar cylinders in brass, plated brass and 316 stainless steel, from GasArc and GCE DruVa.

Barstock diaphragm regulators for industrial, special and high-purity gas.

Chrome plated brass and stainless regulators for high-purity applications.

Prefer to browse by grade? Regulators by grade · by manufacturer

316 stainless steel regulators for grade 6.0 speciality gases, where keeping contamination out of the gas stream matters most.

Regulator bestsellers

Choosing a regulator?

Our guide covers matching the gas, purity grade, inlet and outlet pressure.

Bespoke manifolds & hard-to-find parts

Send us your specification. We design and build gas manifolds to suit your facility, and source the parts we don’t list online.

Manifolds, Hoses & Ancillaries

Everything between the cylinder and the point of use: manifolds, flexible hoses and coils, outlets, and the essentials that keep connections sealed and safe.

Wall-mounted gas manifolds, plus bespoke builds designed around your facility’s exact specification.

Stainless steel braided hoses, pigtails and coils for high-pressure gas.

Point of use regulators for laboratory benches and process lines.

Workshop essentials

Inspection, Compliance & Installation

Alongside the equipment, we help you keep gas systems safe, documented and compliant.

Inspections

Inspection of your gas equipment against a written scheme of examination, with detailed reports and recommendations.

Written Schemes of Examination

Schemes tailored to your equipment, setting out inspection procedures, frequencies and methods.

Bespoke Installations

Design and installation through our partner Spectrum Gas Systems, for grades 4.5 to 7.0.

Training

Training and educational resources tailored to your team and installation.

Technical Guides

Need help choosing the right equipment?

Whether you are matching a connector to a cylinder, choosing a regulator for a purity grade or planning a manifold, our team can help you find the right equipment for the job.

Connector identification

Send us the cylinder valve details or a photo of the cylinder label and we’ll identify the connector you need.

Regulator selection

Tell us the gas, purity grade and outlet pressure and we’ll recommend a suitable regulator.

Bespoke and bulk enquiries

Manifold builds, larger quantities and parts we don’t list online.

Jennifer Hynes, Director and Sales Manager at GES Gas Equipment Services
Jennifer HynesDirector & Sales Manager

Speak to the team

Call, email or send an enquiry and we’ll get back to you.

Call us

01270 421700

Email us

info@gasequipmentservices.co.uk

Send an enquiry

Use our contact form and we’ll get back to you.